EWI SCVKM36-EX 36” HEAVY DUTY DRUM FAN 220-240 VOLT/ 50 HZ

EWI SCVKM36-EX 36” Heavy Duty Drum Fan 220-240 Volt/ 50 Hz

Heavy-duty galvanized steel base assembly

Corrosion resistance inside and out

Rubber wheels designed in-line with housing

Stacking tabs included

Low sound levels exceeding OSHA regulations

Stacking capability up to four fans high

Made in USA with dependable, long lasting components

High density polyethylene housing for superior impact, extreme temperature and abrasion resistance

Product Specification:

Unit Dimension:               39.75”H x 40.75”W x 19.75”D (1010x1035x502 mm)

Unit Weight:      90 lb. (41 kg)

Shipping Weight:              92 lb. (42 kg)

Heavy Duty Drum Fan

Technical Specification

Voltage                220-240 Volt

Hertz     50 Hz

Thrust   4.4 lbf (19.6 N)

Thrust Eff. Ratio                12.1 lbf/kW (53.8 N/kW)

Airflow 9,200 cfm(15,600 m3/h)

Efficiency             25.1 cfm/W  (42.6 m3/h/W)

Air Velocity @ 10 ft.        600 fpm (3.0 m/s)

7.0 mph (11.0 km/h)

Sound Level @ 10 ft.       62.5 dBA

Motor Specification

Enclosure            TEAO

Horsepower       1/2 hp (0.375 kW)

Speeds Single

Rotational Speed             840 rpm

Current                3.1 A

Phase    1 ph

Service Factor    1.0

Ambient Temperature  40°C

Insulation Class B

Thermally Protected       Yes

Shaft Size            5/8 in. (15.9 mm)

Blade Specifications

Diameter             36 in. (92 cm)

Wings    3

Wing Material    Galvanized

Pitch      22°

Bore Size             5/8 in. (1.59 cm)

Weight and Dimension

Unit Weight        90 lb. (41 kg)

Shipping Weight               92 lb. (42 kg)

Unit Dimension 39.75”H x 40.75”W x 19.75”D (1010x1035x502 mm)

Online charges for shipping are the approximate charges not the final shipping charge

For Large Appliances above 80 pounds the shipping rates may vary depending upon state.

For Residential delivery there will additional $40 to $75 charge Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop off Freight service

MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON ARE A DEAD GIVEAWAY.  If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to affect the proper functionality of the product, please refuse the delivery.