POWER X-CHANGER EX-16 FREQUENCY & VOLTAGE CONVERTER STEP-DOWN VOLTAGE & FREQUENCY CONVERTERS

Overview
This series is a double conversion Power Converter which produces stable pure sine wave voltage and frequency output (O/P). With the Converter, you can protect your equipment from most of the power problems, including power sags, power surges, and line noise, etc. With the common neutral topology, the Converter provides internal connection from AC I/P neutral to AC O/P neutral; thus, it does not need to use an isolation transformer to provide 0 volt from AC I/P neutral to O/P neutral. This feature will reduce the interference to loads of communication or video system.

Features

With outstanding performance & reliability, the unique benefits of the Converter include the following:

• Common Neutral, Double Conversion Topology
  (O/P Neutral to I/P Neutral is 0 volts normally)
• Input Power Factor correction
• Low Noise Smart Cooling Fan Design
• High Efficiency, New Full-bridge Inverter Design
• Full Function LCD Display
• Automatic Restart of Loads After Overload Shutdown
• AC Input Generator Compatible
• Remote Emergency Power Off

SPECIFICATIONS

STEP-DOWN Voltage and Frequency Converter (EX Series)

Model12060EX-812060EX-1212060EX-1612060EX-21

Output

Capacity1000VA/900W1500VA/1350W2000VA/1800W2600VA/2340W

Output Voltage100V/110V/115V/120V Selectable

Output
Current-Amps @ 60Hz8.4 Amp12.6 Amp16.8 Amp21.8 Amp

OUTPUT PEAK CURRENT (<250mS)26 Amp38 Amp50 Amp60 Amp

Voltage Regulation±2% of selected output voltage

Output Frequency
(sync to mains)50±0.05Hz or 60±0.06Hz (Auto-Synchronized to Mains)

Output Frequency
(not sync to mains)50/60Hz (selectable from LCD function button) 50±0.01Hz or 60±0.01Hz

Crest Factor3:1

Voltage WaveformSine Wave

Output Distortion (Resistive Load)<2%

Output Distortion (Reactive Load)<3%

Non-Linear Peak Current for 30 sec.18A27A36A42A

Standby Power18W27W

Total Harmonic Distortion<3% (at full resistive load)

Output EMI FilterN/A

Output RFI Filter30Mhz - 1000Mhz

Clamp Level200V PEAK

Protection

Over load Protection100%~129% for 60 seconds delay, then alarm ; alarm for 60 seconds, then shutdown o/p;
> 130%, alarm for 2 seconds, then shutdown o/p;

4AOutput protected from short circuit by pulsating type
Auto-Restart time: 30 seconds

Input

Voltage Range180V~285Vac

Maximum Continuous Load900W1350W1800W2340W

Maximum Peak Load1200W1800W2400W3000W

Input Current6 Amp9 Amp12 Amp15 Amp

Input Frequency Range45Hz 70Hz

PhaseSingle

Noise FilteringFull-Time EMI/RFI Filtering

Input EMI Filter150Khz -30Mhz( class A)

Input RFI Filter30Mhz - 1000Mhz( class A)

Over Current ProtectionBy Re-Settable
Over Current Protector

Voltage Range180 V ~ 285 Vac

Power Factor0.98

Audible AlarmOver load alarm: Short-circuit alarm, Thermal alarm

Inrush Surge Capacity<100A, 3mS

Voltage Interruption
Ride Through10mS

Efficiency

Efficiency>89%

Output Connection from Mains

Ground Input and Output Ground Connected

NeutralInput and Output Neutral Connected( after EMC inductor )
Isolation Transformer is not required

Indicators

LCD Control PanelDisplays Input Voltage, Output Voltage, Output Frequency, Temperature, Load Level

Selectable Output Voltage and Output Frequency

LEDN/A

Output Compatibility

Output Compatibility with UPSYes

Environmental and Safety

Operating TemperatureUp to 1500 meters: 0 to 40 (32 to 104)

Transit/Storage Temp-15 to 55 (5 to 131)

Relative Humidity5 – 95% Non-Condensing

Operating Altitude0 3000 Meters

Moisture SensitivityInternal Fan

Audible Noise45 dBA (at 1 meter from surface of unit)

Cooling

Natural VentilationNo

External Cooling Fan ControlForced air cooling by internal fan

Physical

Dimensions W×D×H38×20×18cm
14.96x7.87x7.08in45×20×18cm
17.71x7.87x7.08in51×20×18cm
20.08x7.87x7.08in51×20×18cm
20.08x7.87x7.08in

Weight Net/Gross6.5kg
14.33lbs7.0kg
15.43lbs8.0kg
17.64lbs8.5kg
18.74lbs

Shipping Dimension50.80x33.02x35.56cm
20x13x14in55.88x33.02x35.56cm
22x13x14in63.50x33.02x35.56cm
25x13x14in63.50x33.02x35.56cm
25x13x14in

Shipping Weight7.94 kg
17.50 lbs9.30 kg
20.50 lbs11.57 kg
25.50 lbs11.79 kg
26.00 lbs

Others

Standard AccessoriesInput Power Cords, Type F, Type G, Type I, Type M.

Wall MountableNo

Warranty2 Years, Full Replacement

Quality Control StandardISO9001

Approvals and Safety MarkingsCE