MAYTAG MFR30PD COMMERCIAL WASHER CAPACITY 30 LBS 240 VOLT60HZ
Product Code: MA-MFR30PD Product ID: 22003
Product sold by: samstores.com
Availability: In Stock New
MODEL MFR30PD
MOTOR 1.75
VOLTAGE 210-240 VOL
WASH SPEED 45
Extract speed — maximum rpm 525
Extract speed — maximum g-force 100
LIQUID SOAP SINGLE 8
Water inlet hose length — f t. (m) 5 (1.52)
Operating pressure — psi (bar) 14.5 – 116 (1 – 8)
Drain size diameter/drain hose length — f t. (m) 3.0 (76) O.D./1.67 (.5)
Lbs. (kg) 30 (13)
Cylinder volume — cu. f t. (liters) 4.6 (130.2)
Cylinder diameter — in. (mm) 25.6 (650)
Cylinder depth — in. (mm) 15.6 (396)
COLOR Stainless Steel
Crated — lbs. (kg) 452 (205)
Uncrated — lbs. (kg) 430 (195)
A) Height — in. (mm 48.2 (1225
B) Width — in. (mm) 29.5 (750)
C) Depth — in. (mm) 29.13 (740
D) Floor to bottom of door — in. (mm) 16.9 (430)
E) Depth including handle and vent on back — in. (mm) 32.3 (820)
F) Floor to drain outlet center — in. (mm 3.4 (86)
G) Side to drain outlet center — in. (mm) 14.8 (375)
Door opening — in. (mm) 16.1 (409)
This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets.
Online charges for shipping are the approximate charges not the final shipping charge.
For Large Appliances above 80 pounds the shipping rates may vary depending upon state.
For Residential delivery there will additional $40 to $75 charge.
Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop Off Freight service.
MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON IS A DEAD GIVEAWAY.
If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to effect the proper functionality of the product, please refuse the delivery.
Name | Rating | Comments |
---|