BUNN VPS COMMERCIAL POUROVER COFFEE MAKER WITH 3 WARMERS

Description

This commercial coffee brewer brews 3.9 gallons of coffee per hour, or approximately 100 cups. Three separately controlled warmers make this brewer a fantastic addition to any restaurant. The low-profile design fits most countertops. Carafes sold separately.

Policies & plans

Specifications

Low-volume brewer brews 3.9 gallons per hour (100 cups)

3 separately controlled warmers (1 upper, 2 lower)

Decanters not included

Low-profile design fits most countertops

Plastic funnel

Black finish

120V/15 amps

Coffee filter model: 20115

Electrical: Requires 2 wires plus grounded service rated 120V, single phase, 60Hz

Warranty

Bunn-O-Matic Corp. ("Bunn") warrants equipment manufactured by it as follows:

1) All equipment other than as specified below: 2 years parts and 1 year labor

2) Electronic circuit and/or control boards: parts and labor for 3 years

3) Compressors on refrigeration equipment: 5 years parts and 1 year labor

4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 pounds of coffee, whichever comes first

These warranty periods run from the date of installation Bunn warrants that the equipment manufactured by it will be commercially free of defects in material and workmanship existing at the time of manufacture and appearing within the applicable warranty period. This warranty does not apply to any equipment, component or part that was not manufactured by Bunn or that, in Bunn's judgment, has been affected by misuse, neglect, alteration, improper installation or operation, improper maintenance or repair.

Non-Defective Returns:

Bunn accepts returns within a 60 day period if the product is returned in the original carton and in saleable condition. A 15% restocking fee will be applied to products that are not under warranty or defective.

Please address all non-defective returns to:

Bunn-o-matic

RA#21904

1924 High School Dr.

Afton, IA 50830

Defective Returns:

Before returning Bunn products, the Member must call Bunn Technical Service at 1.800.286.6070. Please have the product serial number available when placing the call.

It is very important that machines are packed with original internal packaging and external carton to prevent damage during shipment.

Please make sure to drain any remaining water inside of the unit prior to shipment.

If you do not have the original materials, please call 1.800.637.8606 ext. 7273 to request them.

Assembled Country

USA

Assembled Size

19.8"H x 23"W x 8"D