25% faster RPM in low speed. Makita-built 4-pole motor delivers 560 in.lbs. of Max Torque and 360 in.lbs. of PTI torque. Variable 2-speed design (0-400 & 0-1,700 RPM) covers a wide range of drilling, driving and hammer applications. Compact design at only 9-9/16" long and weighs only 5.3 lbs. for reduced operator fatigue. All metal gears and aluminum gear housing for maximum jobsite durability. Shift-Lock drive system quickly shifts between modes. 2 built-in L.E.D. lights with afterglow illuminate the work area. Ergonomic shape fits like a glove with even pressure and easy control. Soft grip handle provides increased comfort on the job. LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles. LXT Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. 3-year warranty on tool and 1-year warranty on battery and charger.
- Capacity in Steel: 1/2"
- Capacity in Wood: 2-9/16"
- Capacity in Masonry: 5/8"
- No Load Speed Low: 0-400 RPM
- No Load Speed High: 0-1,700 RPM
- Blows per Minute Low: 0-6,000 BPM
- Blows per Minute High: 0-22,500 BPM
- Max Torque (in.lbs.): 560
- PTI Torque (in.lbs.): 360
- Battery: 18V LXT Lithium-Ion
- Length: 9-9/16"
- Net Weight (lbs. w/battery): 5.3
This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets.
Online charges for shipping are the approximate charges not the final shipping charge.
For Large Appliances above 80 pounds the shipping rates may vary depending upon state.
For Residential delivery there will additional $40 to $75 charge.
Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop Off Freight service.
MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON IS A DEAD GIVEAWAY.
If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to effect the proper functionality of the product, please refuse the delivery.