High performance system for interior work and renovation – 220 Volt Professional Set for Tilers / Plumbers. Carefully selected set for the tile setter/installer. Ideal for replacement of an individual tile or replacement of tile grout in an entire room. Highest quality and stability due to the use of ball and needle bearings together with a motor and gearbox designed for continuous use and heavy loads. Highly suited for fitting work. Hexagonal tool mount for outstanding torque transfer between tool and accessories. Very limited dirt or dust generation. With the dust extraction equipment and the blades, tile grout can be cut out cost-effectively, accurately and without a lot of dust. The set allows individual tiles to be cut out and replaced without damage to adjacent tiles. Grout can be cut out quickly and accurately, right into corners and radii, with limited dust and no overcut. Perfect, for example, for flush cut offs of old heating pipes, cutting to length, making recesses, removing silicone and acrylic sealants, drywall cutouts, corner blocks or flooring panels.
Power consumption: 400 Watts
Power output: 220 Watts
Oscillations: 11,000 – 18,500 per min.
Amplitude: 2 × 2.0 degrees
Cable with plug: 16' (5 m)
Weight: 2.7 lbs. (1.45 kg)
Tool mounting: QuickIN
This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets.
Online charges for shipping are the approximate charges not the final shipping charge.
For Large Appliances above 80 pounds the shipping rates may vary depending upon state.
For Residential delivery there will additional $40 to $75 charge.
Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop Off Freight service.
MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON IS A DEAD GIVEAWAY.
If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to effect the proper functionality of the product, please refuse the delivery.